Modern fuels can introduce a mix of contaminants and compounds to your engine that affect your performance, efficiency and drivability. If your vehicle is suffering from any of these problems, there is an easy fix. Fuel system additives from Rislone’s labs can clean your fuel system and improve how your vehicle runs. Our advanced formulations are suitable for all makes and models, including gas and diesel vehicles.
How Often Do I Use Fuel Injector Additive?
How often you use Rislone fuel treatment depends on the type and frequency of driving you do. Short, infrequent drives tend to create more buildup of deposits, so if you drive your car infrequently or only on short trips that don’t adequately warm up your engine, you will want to use Rislone every 3,000 miles. This is not necessary per se, but it’s a good insurance policy if you take short, quick trips, or ask your vehicle for heavy-duty performance.
This also goes for drivers who spend a lot of time in cold weather or stop-and-go traffic. This type of driving also causes deposits to form on your fuel injectors and valves, creating power, fuel economy and pollution issues.
If your driving includes a lot of highway driving, one bottle every 5,000 miles is adequate (and is our recommended installation interval). However, if at any time you find your vehicle suffering from any of these problems, consider adding a bottle of our fuel treatment:
- Loss of engine performance or throttle response
- Reduced fuel economy
- An increase in emissions
- Rough idle or hard starting
Rislone fuel injector cleaner is not only corrective. It works as a preventative measure to help keep deposits from building up in the first place. Make a habit of using a bottle of our gas saving fuel injector additive every 3-5,000 miles and avoid carbon and gunk buildups before they can cause problems for your engine. Many enthusiasts use Rislone to prevent their fuel systems from encountering problems.
Find a Store
Use our handy online locator to find a store near you that carries Rislone products. Our customers notice a difference right away when they use our Gasoline Fuel System Treatment or Diesel Fuel System Treatment. You can also contact our team (real humans, based in the USA) for more information or to learn more about how our fuel system additives can save gas, improve performance and reduce your emissions.
When should I put in fuel injector cleaner? ›
Generally, most mechanics recommend cleaning the fuel injectors every 60,000 to 90,000 miles. If you've noticed any of the following, it's time for a fuel system cleaning: Significant decline in your miles per gallon. Loss of performance and power.Do you put fuel injector cleaner before or after gas? ›
For the first dose, simply install when you have a full tank of gas. It's that simple. From there, many experts will probably tell you that you should add a fuel injector cleaner to your gasoline every time you fill your tank up.How do I know if I need fuel injector cleaner? ›
If your injectors are dirty and/or clogged, your vehicle's engine might misfire. This will feel as if your engine is sputtering, which will make your vehicle lurch or vibrate. Your engine is misfiring and sputtering because the fuel injectors are not providing enough fuel for the air/fuel mixture.Is it necessary to use fuel injector cleaner? ›
CARS.COM — Cleaning fuel injectors is a service frequently recommended by dealers and repair shops. But unless there are noticeable signs of clogged fuel injectors (such as a rough idle, stalling, poor acceleration or high emissions levels), it might not be necessary.Does fuel injector cleaner work immediately? ›
How Fast Do Fuel Injector Cleaners Work? Although most fuel injector cleaners begin working immediately, it takes time before the improvements become noticeable. Before the cleaners start working effectively, the vehicle should travel several hundred miles and burn a good portion of a full fuel tank.Can you put fuel injector cleaner and gas treatment at the same time? ›
Yes you can but you may not need it or it may not help.Can I use 2 bottles of fuel injector cleaner? ›
Yes, I do this back to back 1 or 2x a year. My fuel tank is 20 gallons and the fuel system cleaner that I use suggests 2 bottles for 20 gallons, so I run 1 bottle now and then when I run down to 1/2 or lower I add the second bottle.Can I put fuel injector cleaner in a half tank? ›
Absolutely Yes. Fuel injector cleaners work in very diluted amounts, and twice the strength (same amount of cleaner in half as much gasoline) works just a little faster. There is no harm in injecting a fuel injector cleaner in a half tank only the thing to be be kept in mind is the right amount being used.How long does fuel injector cleaner take to clean? ›
With the proper fuel injector cleaning equipment and chemicals it takes the professionals about 45 – 60 minutes of actual cleaning time to clean a single or set of fuel injectors.How do I know if my car has dirty fuel injectors? ›
- Engine Stalls or Rough Idle. Your car may sputter or shake, mostly during traffic stops. ...
- The Engine Misfires. ...
- Bad Fuel Economy. ...
- The RPM Needle Starts to Dance. ...
- Check Engine Light.
Will injector cleaner unclog injectors? ›
Although there are many products such as injection cleaning additives that claim it can clean or unclog a clogged fuel injector while it is in the engine, they cannot.Can a bad fuel injector damage the engine? ›
Left too long, a faulty fuel injector can cause serious engine damage that requires major repair. Avoid the cost and hassle by using Rislone Gasoline Fuel System Treatment or Diesel Fuel System Treatment every 3,000 to 5,000 miles, depending on the type of driving you do.What are the side effects of fuel injector cleaner? ›
Causes skin irritation. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways. Precautionary statements (GHS-US) : Keep away from heat/sparks/open flames/hot surfaces.What happens if you put too much fuel injector cleaner? ›
What Happens If You Put Too Much Fuel Injector Cleaner? It is possible to give a car too much of a good thing and add too much fuel injector cleaner. If this happens, you can risk damaging the lining of the fuel tank. Also, you may notice that there is lowered engine performance and fuel efficiency.How much fuel injector cleaner should I use? ›
Add entire bottle to nearly empty gasoline tank, then fill tank with up to 21 gallons of gasoline. For best results, do not refill tank until near empty. Use every 3,000 miles.Is seafoam the same as fuel injector cleaner? ›
Yes, there is a difference between Sea Foam Motor Treatment (Auto Marine Fleet) and IC5 Concentrated Fuel Injector Cleaner. IC5 is formulated just to clean fuel injectors in gasoline engines. It's a different formula than Sea Foam Motor Treatment.What's the difference between fuel injector cleaner and gas cleaner? ›
Fuel injector cleaners typically have a superior cleansing strength and last longer between applications when compared to gas treatments. Injector cleaners are added to the fuel tank at oil changes.How often should I add fuel injector cleaner to my gas? ›
It works as a preventative measure to help keep deposits from building up in the first place. Make a habit of using a bottle of our gas saving fuel injector additive every 3-5,000 miles and avoid carbon and gunk buildups before they can cause problems for your engine.What does fuel injector cleaner do? ›
Used regularly according to manufacturer instructions, fuel injector cleaners remove harmful deposits of carbon, sediment and gum, cleaning the nozzles of fuel injectors and other parts of the fuel system. Removal of those deposits aid in performance and fuel efficiency.Will injector cleaner fix a rough idle? ›
Yes, they work. You can also use them to clean out your throttle body, with a little DIY work.
Does fuel injector cleaner clean spark plugs? ›
Fuel injector cleaner does nothing for the spark plugs in any way shape or form.Do you use fuel system cleaner before or after oil change? ›
For example, our Techron Complete Fuel System Cleaner is recommended for use every season (winter, fall, spring, summer) or right before an oil change with no more than two treatments between oil changes.Do I use the whole bottle of fuel injector cleaner? ›
Add a full bottle of IC5 Fuel Injector Cleaner to your fuel tank. One bottle treats up to 25 gallons. For best results, add when the tank is low to maximize cleaning concentration.Can you put 2 bottles of fuel injector cleaner? ›
Yes, I do this back to back 1 or 2x a year. My fuel tank is 20 gallons and the fuel system cleaner that I use suggests 2 bottles for 20 gallons, so I run 1 bottle now and then when I run down to 1/2 or lower I add the second bottle.How long does it take for fuel cleaner to work? ›
Although fuel injector cleaner starts working as soon as you put it into your vehicle's tank, it takes time for the effects to become noticeable. You should begin seeing results within 100 - 300 miles after you use fuel injector cleaner.How often should you use fuel cleaner? ›
For fuel injector cleaners, manufacturers recommend once every 3,000 miles. However, some brands may go up to 10,000 miles between fuel additives because you have a newer car or use high-quality gasoline.Do you have to change oil after using fuel injector cleaner? ›
The fuel injector cleaner and the trash that it removes gets burned off during combustion. The cleaner never comes in contact with the oil, so there's no need to change the oil just because you're using it. However, always do your oil changes no later than the recommended intervals regardless.Will fuel injector cleaner unclog it? ›
Although there are many products such as injection cleaning additives that claim it can clean or unclog a clogged fuel injector while it is in the engine, they cannot.What can fuel injector cleaner fix? ›
Used regularly according to manufacturer instructions, fuel injector cleaners remove harmful deposits of carbon, sediment and gum, cleaning the nozzles of fuel injectors and other parts of the fuel system. Removal of those deposits aid in performance and fuel efficiency.